HAL9000

HAL9000
"It just isn't conceivable that you can design a program strong enough to beat players like me."

February 25, 2018

Android UCI engine update: CT800 1.20

CT800 is an average level engine released by Ratmus Althoff who recently concentrated on compiling for Android and finally managed to obtain working binaries.

CT800, in fact, was born as a dedicated chess computer idea and it was designed by Rasmus Althoff.  The original CT800 featured an ARM Cortex M4 microcontroller of an Olimex H405 board that operates up to 168 Mhz, with 1 MB of flash memory, 192+4 kB of SRAM, and multiple I/O and USB connectors, with a 4x20 character text display, two leds, and a 4x4 + 1 keypad as peripherals aka user interface. Voltage source is due to four NiMH rechargeable AA batteries or external 5 V DC power supply.
ct800gameview.jpg

The "chess computer" CT800
CT800's firmware is developed by Rasmus Althoff, released under the GPL Version 3. The chess playing software is an ARM port of George Georgopoulos' open source engine NG-play including a KPK bitbase by Marcel van Kervinck.

GET CT800 1.20 for arm7 and arm8

Previous stable version was:
GET CT800 1.12 for arm7

Development versions from 1.12 to 1.20 were:
GET CT800 1.20p11 for arm7 and arm8
GET CT800 1.20p13 for arm7 and arm8
GET CT800 1.20p14 for arm7 and arm8
GET CT800 1.20p15 for arm7 and arm8

In case of trouble downloading from PC, use your mobile or refer to THIS POST.

134 comments:

Anonymous said...

Hi all,

since there was some interest here in testing the previous version, maybe that also applies to the current one. Especially with the Elo slider.

The most relevant changes from V1.20:

- the pre-search is cut down to 1 ply. I encountered a real game position where the 3-ply pre-search alone would take 800,000 nodes, roughly half a minute on the target hardware - way too much. A nice side-effect is that throttling via node rate works much better, which I guess Lazar will enjoy. :-)

- the engine strength can be set in Elo. In Elo limited mode, the UCI parameters node rate, CPU speed and eval noise are overridden. The Elo setting works independently from the device, except for the maximum which is automatically calibrated to the device speed. That's quite some guesswork, and I don't expect the setting to be "exact". However, it provides an easy slider to control the strength.

Apart from that, the engine sometimes ripped up its kingside only to notice that there is no good place to castle to, which I have fixed. Another improvement is with extremely short thinking times like in 1 second for the whole game, where the engine now is quite an over-achiever.

https://www.ct800.net/download/ct800_v1.30p02.zip

regards, Rasmus

Rahul Srivastav said...

Thanks! It's fabulous.

Lazar Dourakis said...

Hello Rasmus,
I just saw your above post...Ive now downloaded from link.yes i DO enjoy the node precision now :-) I use Ct800 regularly now as a playing/sparring partner so im
interested in its further development.Will report back with any observations that may or may not be useful.
Kind Regards,
Lazar

Rahul Srivastav said...

Hello sir Gurcan!
Is everything ok?

Just do one reply on blog.
Thanks!

Alexei Chernakoff said...

My compilation cfish-290418(arm7,arm64v8).
syzygy1 Update to "Always scale using pawn contribution".
https://app.box.com/s/iuqdh5bl84kybrbnqat4jdig0ibwe3hj

Rahul Srivastav said...

Thank you very much!

Lazar Dourakis said...

Hello Rasmus.Im really liking the new elo feature.i notice that for example at 2100 elo its doing 30kns but in the endgame its doing about 55kns.Is there any randomness in the move selection with the elo option or is it purely node based? ..And how does the engine determine when to increase the node speed-in the elo option ? Is it determined by move count or piece count or ? Im liking what im seeing so far!

Alexei Chernakoff said...

My compilation stockfish.
New strong patch (+8 ELO LTC test).
Author: MJZ1977
Date: Tue May 1 07:12:27 2018 +0200
Timestamp: 1525151547

Penalty for bad bishop with blocked central files

We increase the penalty for bad bishops by a factor proportional
to the number of our blocked pawns in the center files C, D, E or F.

STC:
LLR: 2.97 (-2.94,2.94) [0.00,5.00]
Total: 8868 W: 1870 L: 1700 D: 5298
http://tests.stockfishchess.org/html/live_elo.html?5ae7674f0ebc590e39268b34

LTC:
LLR: 2.95 (-2.94,2.94) [0.00,5.00]
Total: 5813 W: 950 L: 808 D: 4055
http://tests.stockfishchess.org/html/live_elo.html?5ae77bae0ebc5926dba90dd9

Closes https://github.com/official-stockfish/Stockfish/pull/1573

Bench: 5364190

https://app.box.com/s/ftrcdw2ll1o3o33t67p10sm43gsvvoyj

Lazar Dourakis said...

Fantastic Alexei! Thank You!

karim ullah said...

Thanx alot

Anonymous said...

Hi Lazar,

it's probably the move time that hits in. The configured Elo refers to 15 seconds for the current move. That can be reduced by up to 50 Elo when going down to 5 seconds per move or less because humans are not as good at blitz games. On the other hand, it can increase by up to 50 Elo for 2 minutes per move or more because humans are better at long time controls. The automatic calibration at engine startup already leaves 50 Elo headroom for the ramp-up with long time controls.

If you set the strength to 2100 Elo and give a move time of 2 minutes or more (or analysis), the engine will have about 55 kNPS, so that would match. The speed does not depend on the game phase.

Of course, there is still some amount of inaccuracy possible if the engine decides that it doesn't want another depth iteration, which will happen if an iteration is finished and more than 55% of the allocated move time is already over.

Plus that there are the quick replies for obvious moves, and the depth to which the engine checks that an obvious move is actually correct will vary from 4 to 6 plies, depending on the actual node rate limit.

The other thing is the noise, which will kick in at 1900 Elo or less - 1900 after adding/subtracting the move time related +/- 50 Elo.

I'm happy that the scaling seems to make sense for actual human play. :-)

regards, Rasmus

Alexei Chernakoff said...

My compilation xiphos-0.2.4:
https://app.box.com/s/94y54y87tunz2hnuafpsypi2l1hh8wnb

karim ullah said...

Good-job, thankyou

karim ullah said...

Mars isn't yet for android,any reason?

Paulzzz said...

Thanks Alexei!

Rahul Srivastav said...

Hi, Xiphos0.2.4 is very strong now, thanks for the update.

Sir Alexie,
Latest ethereal please, ethereal gain +12 elo by its new patch.

Thanks!

karim ullah said...

Rahul! Find source codes for Mars so Alexei will compile it for us, I bet mars will defeat xiphos..

Rashid Nez said...

Hi Karim,
There is no source code for Mars chess,only engine available for Windows 64-bit.

Rahul Srivastav said...

Hello Karim,

http://www.sdchess.ru/download_engines.htm
Check this may be here!


karim ullah said...

Hi all!
My test of ten engines, using cfa app, I still don't know , who is the winner?
BOOK..(no book)a single opening (Sicilian Najdorf, Byrne (English) attack.pgn) 23 moves was chosen,
So all the engines face each other 10 times. 5time as a black and 5time as white player.
The total played games are 450,
Here is the proof .
https://expirebox.com/download/eb41a510bd7ad16672c6ef87fb484ac0.html
P.S... the link will expire withing 48 hours

karim ullah said...

I have visited this site many times..rahul

Rahul Srivastav said...

Latest ethereal please!

karim ullah said...

Hi,all
Oh my gash,nobody said anything about my test.
https://www51.zippyshare.com/v/buaCFn7F/file.html

Anonymous said...

Hello sir please update your website it has been so long time

Rahul Srivastav said...

Latest ethereal please!

Anonymous said...

Latest SF pls...

karim ullah said...

Anyone has Fritz engine for android, can share the link,

Anonymous said...

Hi,

this is the V1.30 release of the CT800. Some bugfixes, the most critical a buffer overflow with "debug on" and long input lines, so updating from V1.20 is advised. There is now a slider to control the engine strength via UCI_Elo, the throttling via node rate works better, and the engine is much stronger at super-fast time controls like 1 second per game without increments. Some minor improvements to eval and search are also in place.

This release accomodates to quirks in Arena and Droidfish with regard to threefold repetition: Arena misses the threefold when the first occurence was after a two step pawn move without e.p. possibility, and Droidfish sends the third occurence to the engine before declaring draw. In both cases, V1.20 answered with a null move that confused the GUIs, which I have removed.

Since this is a well-rounded release, I expect +3.14 Elo at CCRL.

Release notes and download: https://www.ct800.net/sw_release_v130.htm

regards, Rasmus

karim ullah said...

Thanks alot, anonymous

Anonymous said...

Most recent SF pls

karim ullah said...

Anonymous, this one of May first 2018 only I have that's compiled by Alexei,,
https://www119.zippyshare.com/v/GhygLxrQ/file.html

Lazar Dourakis said...

Very nice! Good to see my sparring partner is being improved :-) Thanks Rasmus and thanks for the update here !

Alexei Chernakoff said...

My compilation of Stockfish is 100518.
Author: protonspring
Date: Thu May 10 15:46:32 2018 +0200
Timestamp: 1525959992
Consolidate pawn storm types
Simplification:
New: I have enabled two compilations for arm64v8.One my usual on GCC-7.2 and new on the most modern compiler GCC-8.This compilation is done with PGO and LTO optimization and is 12.6% faster than standard(10 launches per bencmark).This version is the most recent(~1.8 mb!).
https://app.box.com/s/zcl2j6crtpv5gw8uqbongn09xspdr3mx

Rahul Srivastav said...

Awesome thanks.


Rahul Srivastav said...


Texel chess has been updated on play store.

Lazar Dourakis said...

Thanks for letting us know Rahul! I knew about latest Texel from Peter Osterlund's Dropbox but had not yet seen the playtore version.

Lazar Dourakis said...

Awesome! Thanks as always Alexei!

Paulzzz said...

Thanks Mr.Alexei for the Stockfish update.The same to Mr.Anonymous (I think he's the author of CT800).Javiolo's Stockfish,Cfish,other Stockfish engines and CEPA GUI are also updated in the G.Playstore.Thank you also to Peter Osterlund for updating the powerful Texel engine which has a contempt option now.Were grateful to all the authors...��

Rahul Srivastav said...

Latest ethereal please!

Anonymous said...

GCC8 build is indeed very fast, works like a charm. Thank you Alexei!

Anonymous said...

Ok I just tested K9.42 against SF10052018 for a hundred game round robin match with time control of 10sec each side on my 6 core SD 650 phone and 256 mb of Hash each side and the result is mind bogling 82-18 win for the SF. Just to c how much powerful SF has become over K. Although K's latest official release is quite a bit stronger but yet I beleive even that would not have changed the result much. So in Android we can say that SF is clearly way stronger than K atleast in quick time control.

Rahul Srivastav said...

Hi Anonymous you are right. Komodo is very weak against SF.
See here,

https://drive.google.com/file/d/1Dq2TSsF6gCZnjy9z3gC4yZUqYKLTP4vB/view?usp=drivesdk

Rahul Srivastav said...

Hi Alex,
Would you please check this if any flag in this pgn. I think, now eveytevery is ok.

I have pgn too,

https://drive.google.com/file/d/1uBlTDuC8eOEP-InMvxSbJzhBXPAlRYjX/view?usp=drivesdk

Alexei Chernakoff said...

My compilation Cfish-130518(arm7,arm64v8).
syzygy1 update:Support for very large book files.
New: Cfish (gcc-8 compiler) PGO+LTO for arm64v8 (+10-12% faster than standard).
https://app.box.com/s/nt34eqishn9hvr8mdhdwjh3633pny28u

Rashid Nez said...
This comment has been removed by the author.
Alexei Chernakoff said...

My compilation Ethereal-9.75:
https://app.box.com/s/iuzfoog8cd0u9gzme3ehw1jbbr9vxdak

Anonymous said...

Wow, new record with GCC-8. On my Snap 835 I achieve 5400 knps on starting position straight away, after time it drops due to thermal throttling but 5400 knps without throttling is amazing! Thank you Alexei!

karim ullah said...

I need booot and fire engines.
Can someone drop a link?

karim ullah said...

Hi Alex. I finally found how to convert pgn to binary, so me just converted your pgn books to (bin) format successfully, it took me just 30 minutes to convert,, here is your converted books ...
https://www20.zippyshare.com/v/0qw6z0Me/file.html

Paulzzz said...

Nice one Karim,congratulations.Can you convert the ECO opening book(see below) into binary format?
http://kvetka.org/en/download.shtml
Thanks.

Paulzzz said...

Hi Karim,I found that The Crazy Bishop Chess engine has a "book.pgn".Just click "The Crazy Bishop" here:http://www.top-5000.nl/wbuci.htm

Can you kindly convert it too into binary(bin) format and share it with us?Thank you Karim!

karim ullah said...

Paulzzz, the eco opening book is 2032 games can be read by analyze this app. I can convert it, the crazy bishop book is unreadable ,so I need my PC if I could convert it, right now I'm online using my tablet, I will soon inform you, and yes sure I will convert any book you request,, I even created an another binary book consist of just an opening, to use it with droidfish is a fun, will force driod app to practice your desired opening,,
Here is it,,,https://www33.zippyshare.com/v/Lv20C9lJ/file.html
,,,,, it is just 250bytes,,,

Anonymous said...

Hello Mr. karim ullah, may I request if you could kindly convert this .pgn file to .bin file? I'll appreciate it. Thanks in advance :)

Link: http://www.mediafire.com/file/28h5d4x5he3b98q/games.pgn

karim ullah said...

HEllo anonymous. Here is your converted chess book successful...and you're most welcomed always...
https://www2.zippyshare.com/v/oQszieV0/file.html

Rahul Srivastav said...

Great job Karim!
Thanks

Paulzzz said...

Thank you Karim!Good job�� .I'm excited to see the Crazy Bishop book in binary format(if possible).

Anonymous said...

Wow!! so fast :) thank you very much for your time and effort Mr. karim. I'm gonna test it now ;)

karim ullah said...

Paulzzz,I think the eco pgn is designed for kvetka GUI,it is different from Alex and anonymous,s pgn ,it can't be converted I can't describe it , to open it in notepad++ you will notice lake of information and broken lines. and about crazy bishop, it is the just one opening with lots of variations,I tried to convert it but the result was a simple opening without variations..still if you want to see the binary, I will upload it for you.. thanks

karim ullah said...

Googling for pgn books. I visited this page..
http://kirill-kryukov.com/chess/tools/opening-sampler/pgn/

Paulzzz said...

Thanks Karim.I still want to see it.Btw,could you please convert Carlsen's pgn here into bin format?https://www.pgnmentor.com/files.html
Actually a lot of players to choose from:)
Thank you again!

Paulzzz said...

Seems interesting:)

Paulzzz said...

Hello Karim have you already saw this?
http://chesstroid.blogspot.com/2015/01/all-openings-of-tcec-6-for-testers.html?m=1

karim ullah said...

Not until now, seems interesting, do you want me to convert them to binary format?

karim ullah said...

Paulzzz the best chess players opening books was already converted by Alex, this is Alex shared link,,
https://www30.zippyshare.com/v/82I206uD/file.html

Alexei Chernakoff said...

My compilation hiphos-0.2.6:
https://app.box.com/s/o6kg025fdn08l3gqh6ppudb7da2wp4xm

karim ullah said...

Thanks Alexei for the update,BTW firenzina engine is different from fire engine? Or they are the same?

Paulzzz said...

Yes Karim please convert it to a binary file.Gurcan also made another one:http://chesstroid.blogspot.com/2015/06/all-openings-of-tcec-7-for-testers.html?m=1
Try also to convert into bin if you have time,thanks for your time and effort Karim!

Paulzzz said...

Thank you Mr.Alexei!

karim ullah said...

Yes ofcourse I will and I'm busy to bring Olympiad arena abk format book to binary book, its a Bigbook nearly 160 MB...

karim ullah said...

I wish for success

Paulzzz said...

Awesome,that will be a good book.

Rahul Srivastav said...

Thanks sir Alexie! This is a great chess engine.
Thanks once again!

Rahul Srivastav said...

Hello sir Alexie,
Is it possible to compile xiphos with gcc7.2 or gcc8. If possible than next time please provide xiphos with gcc 7.2 or gcc8.
Thanks!

karim ullah said...

Hi to all,
Paulzzz I hope its Been converted with no error lol.
Tcec6 link
https://www58.zippyshare.com/v/MCiHrtn2/file.html
Tcec7 link
https://www58.zippyshare.com/v/OLIl2Rgd/file.html

Thanks for encouragement

Alexei Chernakoff said...

Why do that?Engines made on gcc-8 are faster and stronger.Why would I waste time on another compilation?

Rahul Srivastav said...

It's mean latest Xiphos compiled with gcc8! Great

karim ullah said...

I'm gonna share this binary chess book with those who really want to have it.. this book was extracted from bpchess application..in fact this is my favorite book among all I have in binary format..because of its longer moves, some openings even reaches uptown 34moves

https://www.mediafire.com/file/x6gy32c3lhgrc32/normal.bin

Anonymous said...

Latest SF Pls...

Alexei Chernakoff said...

My compilation stockfish-160518(arm7-pgo,arm64-pgo):
https://app.box.com/s/9uxgbsr6sesena919le8ebk69b7n8oy3

Anonymous said...

Oh yeah. Thanx Alex.

Paulzzz said...

Hi Karim,thank you very much your converted bin books works in DroidFish and CEPA by javiolo.Excellent.

Btw Karim I discovered this new book package(just released this year)and has a pgn file:SALC v5 hc10m.pgn with 24,996 games.Can you please convert it into bin book?Thank you Karim I appreciate your efforts a lot.

Paulzzz said...

Here is the link:http://www.sp-cc.de/salc-openings.htm

karim ullah said...

Paulzzz I tried to convert it but unfortunately this time didn't work for me, spent about three hours using different ideas but none worked, then I copied 5 opening from that book and converted it to binary and it was converted successfully, I think the tool that I'm using has limit of conversion,but never mind tomorrow I will try some more ideas to convert it into two parts and merge them back...and our area has a time limited power. Thats why I'm so slow to reply your comments...

Anonymous said...

Latest BrainFish please...

Paulzzz said...

It's OK Karim,take your time:)

karim ullah said...

Hi Paulzzz,, finally I got to compile your requested book into binary format. But I have two binaries. The first try and second try into a rar file..plz let me know which book was compiled correctly,, again thanks for encouragement...
Here is the link..
https://www.mediafire.com/file/3anmjx9pb87bquy/SALC_V5_hc_10m.bin.rar

karim ullah said...

Paulzzz me just also compiled for you,Carlson‘s pgn.into variants depth..for example. 8moves.10moves.and 12moves openings book.
https://www.mediafire.com/file/rd5bxiy0fp7dmb1/carlsenbook-variant-depth.rar

Paulzzz said...

Thank you very much Karim,I tested them in DroidFish and I think the 2 bin books are correctly compiled.Good job! :)

Paulzzz said...

Thank you!I could use them to practice openings of Magnus in DroidFish:)

karim ullah said...

How fast did check them?are sure ? Lol

Lazar Dourakis said...

Karim you are doing a great job with the opening books! I really appreciate your efforts :-)

karim ullah said...

You are all welcome. I'm ready in your services.

Paulzzz said...

I checked many of the games in pgn format with the 2 SALC bin books that I requested and so far I found no missing moves.

Paulzzz said...

I mean opening moves and games compared with the original pgn format...

karim ullah said...

Thanks Paulzzz, this will help me to better compile..

karim ullah said...

Hi
Comparing to previously compiled Tcec6 and Tcec7 books,the newly compiled books are more correct.because it reaches to 6 lines,,
https://www.mediafire.com/file/dyhwvxarqe2ucd3/tcec-6-7-new-compiled.rar/file

Paulzzz said...

Thank you Karim for updating the TCEC books.I appreciate it.Keep up the good work.Hopefully Gurcan can provide us with another TCEC pgn book.

karim ullah said...

I'm visiting this blog more than FB, still news, any reason?

Anonymous said...

Ok I think it's time for new SF again. Latest SF pls...

karim ullah said...

hi paulzzz.. after a hardwork and along time the ECO opening book you request from kvetka website is ready now.modifying of pgn file really took me hours and hours for 6 days,and finlly i compiled it to binary format ...plz check it carefully if there was any mistake just confirm it,,,i will be glade to hear such good news...thanks
here is your requested book
http://www.mediafire.com/file/522ug33d2pdesuh/eco-book.7z

Paulzzz said...

Hi Karim,thank you very much for converting the kvetka eco book into a polyglot book.You've made a good work.I'm still testing the opening lines in the book and I didn't find any error so far.
Congratulations.

Regarding the SALC bin book,upon my further test I can say that the version 1 is more correct..Your books are very useful and they're installed in Droidfish and CEPA GUI's.

karim ullah said...

Thanks Paulzzz now I feel like I'm atleast somebody..lol

karim ullah said...

BTW where is everyone ? I'm visiting this blog more than FB, is everything OK?

Paulzzz said...

Yes it's OK.This blog is very helpful especially to Chess aficionados like us.Me too only check my FB account sometimes as I have red the negative effects of immersing ourselves too much in social media platforms.I prefer face to face interaction with my friends and relatives and staying true to myself and not the "manicured" or fake version of people that many are doing in social media platforms.

Paulzzz said...

You're now a very good polyglot book maker��

karim ullah said...

Thanx Paulzzz ,is everything OK, I meant to say since we have changed the topic to compiling opening books, no body else takes part in the subject,except you and me,
Don't know I feel like alexei and gurcan are angry to me since they have stopped new engine compiles.....what do you feel Paulzzz?

Paulzzz said...

No I don't think they're angry and they have no reason to become angry lol.Mr.Gurcan as far as I know is dealing with his business which is the reason for his silence these past month(s).Alexei is preparing new engine compilations for us:)

Paulzzz said...

Everything is OK.Im sure many followers of this blog benefitted from the opening book compilations of yours(especially me,Rahul and Lazar) but I think others just prefer to be silent.

Rahul Srivastav said...

Yes Paulzzz,you are right.

karim ullah said...

Thanx Paulzzz and Rahul,I'm at yours service,by the way today I found how to convert binaries back to pgn successfully. So here I have a big binary book about 12MB size,called Hannibal.bin its depth reaches upto 30 moves, what I'm planning is to convert it to pgn and then back to binary 15 moves, so what do you think about it Paulzzz? And Rahul?

Paulzzz said...

Is that the HannibalBigBook.bin?Yes that is welcome Karim.Thank you very much for your services:)
Btw I saw this in Season's GitHub page:
https://github.com/jdart1/arasan-chess/tree/master/book
Can the two files(basic.pgn and eco) be converted into bin books?


Paulzzz said...

I mean Arasan's GitHub page:p

karim ullah said...

Hey Paulzzz I changed my mind,because an hour before I found that Hannibal big book had already a mini version by its author,
https://sites.google.com/site/edapostol/hannibal

karim ullah said...

Check this too, and tell me if it was already visited by you,
https://sites.google.com/site/teambrchess/playlist---books

This site has lots of book specially in ctg format and also bin,,there's lot of computer engines with sources, and many more materials,
Its a big lunch for a Gundy lol

karim ullah said...

Hungry

karim ullah said...

paulzzz..i am login from my computer and i quickly compiled your requested basic.pgn 830 annotated to bin ,,book depth from 11moves upto 15moves.
http://www.mediafire.com/file/o3jild0tqicingu/basic.bin

Paulzzz said...

Yes I checked out the Team Brazil's book repository for ctg and bin books:)

Paulzzz said...

Wow that's fast thank you Karim!:)

Paulzzz said...

Some of the links though has virus or the books not available...

karim ullah said...

Yes most of easy-share links are expired,but luckily the mediafire ones working,

karim ullah said...

Paulzzz just check this ranomi.bin if the link is working

https://drive.google.com/file/d/0BwDWupDvQ-QWTE85dmFMZUROM3M/view

Anonymous said...

Is this site dead? No update for months. Looks like it has come to it's end.

Paulzzz said...

The link doesn't work with me.Btw,regarding the ranomi.bin books there are a lot of them at chessgod101 site...

Paulzzz said...

Hopefully not...

Rahul Srivastav said...

Hello sir Alexie,

Please provide Ethereal 10.
Thanks!

karim ullah said...

Bye bye, I wanna get disappeared for months too...

Paulzzz said...

HI Karim,the files contained in the link you gave me appeared in my Google Drive.The Ranomi book is 12 mb in size...

Paulzzz said...

I tried to download the book but it seems that the link isn't responding.To my surprise I checked my Google drive and I got it there.

Anonymous said...

Hey Karim probably Gurcan is busy.Its Lazar here.cant seem to be able to log in at the moment.Hope you stick around ;-)

Anonymous said...

Hi all. I have an idea to make an app for playing with leela chess from our Android phones. As everytime opening a beowser and loading the site and going to the playing page is not very convenient or time consuming. So if we have an app to play against Leela it will be quite easy to start. If some one from here post this idea on Lc0 forum then I will be greateful.

Paulzzz said...

This comment section had been silent for a while now,Sir Alexei do you have the latest compilations of Cfish and Stockfish?Thanks

Lazar Dourakis said...

Hey Paulzzz.Im guessing and hoping that everyone is just taking a break and the blog isnt dead yet.Lets hope not...

naushadali naushadali said...

Gull chess has been updated.
Follow - www.chessdom.com/bonus/live.php

Paulzzz said...

Yes Lazar I'm still optimistic that this blog is still alive.